How to Prepare Your Spa for an Incoming Storm or Cyclone

Severe weather can cause serious damage to your spa if it's not properly secured. High winds, heavy rain, and flying debris pose a risk, but with the right precautions, you can help protect your investment.

Once you've ensured your personal safety and followed all official emergency guidelines, take these steps to minimise potential damage to your spa.

Essential Steps to Protect Your Spa:

• Secure the Cover – Use heavy-duty ratchet or cyclone straps to keep it in place.
• Remove Loose Objects – Clear furniture, decorations, or anything that could become a projectile.
• Flooding - Make sure all drains are cleared to avoid system flooding.
• Power Down if Needed – Shut off electricity to prevent damage to electrical components from brownouts.
• Inspect & Clean After the Storm – Check for debris, water contamination, or structural damage before using your spa again.

By taking these steps after ensuring your safety, you can help minimise potential damage and get your spa back in action faster.

Stay Safe First!

Your safety and that of your family come first. Always follow official emergency guidelines and local weather advisories before taking any action to protect your spa.

What to do before the storm or the cyclone

To protect your spa from potential storm damage, follow these key preparation steps:

1. Secure Your Spa Cover Properly

A strong wind can easily lift and throw an unsecured spa cover, leading to costly replacements or even complete loss. Standard clips won’t be enough to keep it in place.

• Use ratchet straps or spa cover cyclone straps– These provide the best security for your spa cover in strong winds.
• Tighten them firmly to prevent the cover from lifting or being blown away.
• You might need to install concrete anchors to attach the ratchet straps to.

2. Remove Nearby Objects That Could Fly Away

During a storm, strong winds can lift lightweight objects and cause them to damage your spa. Clear the surrounding area of:

• Outdoor furniture
• Pool floats
• Umbrellas
• Potted plants
• Loose decorations

If possible, store these items in a shed or garage until the storm passes.

3. Power Down Your Spa

If there’s a risk of power surges or brownouts, turning off your spa can help protect its electrical components.

To do this:

• Turn off the power at the main breaker.
• Unplug the spa if not hardwired.
• Cover electrical outlets or connections to prevent water damage.

If the storm is mild and there’s no power issue risk, you may leave it running. However, always follow manufacturer recommendations for your specific spa model.

4. Protect Your Spa Cabinet and Equipment

Consider covering the spa with a waterproof tarp under the cover tie-down straps.

• Make sure all spa cabinet doors are closed and latched or screwed into place.
• Check that drainage systems are clear so water doesn’t collect around the base.

After the Storm – Check and Clean Your Spa

Once the storm has passed and it is safe to go outside, follow these steps before using your spa:

• Check for debris on the cover and around the spa.
• Inspect the straps and cover for any signs of damage.
• Open the spa and check the water for dirt, leaves, or contamination.
• Run a full cleaning cycle, sanitise and rebalance the water chemistry before soaking.

To learn more about cleaning your spa pool after a flood or storm, check out our detailed guide.