When you’re installing a spa pool or swim spa, finding the right information and working out what rules apply to your space can feel a little overwhelming! We understand. That’s why we’ve explained everything you need to know in a clear and simple way.
After reading this article you should have a good understanding of the rules and requirements for installing a spa or swim spa in South Australia.
If after reading this article, you feel like you need help, we can do the certification for you or refer you to a local certifier.
Click the button below to contact our certification specialist.
The first section of this article applies to South Australia and covers spa building permits, registrations, installation, safety barriers and general questions for this region only.
The second section covers rules that apply Australia-wide including:
Please note the majority of spa-related questions also apply to swim spas.
Important: This document provides a simplified overview of current regulations in reference to Spa World™ products. It is not a complete guide. We advise all customers to seek independent advice in relation to their own personal site requirements. The information in this article was accurate at the time of writing. This can change without notice and you must check the latest information with your local council.
If you prefer to watch a video, click below to watch and learn about spa regulations in SA and Australia.
Yes, in most cases you will need a building permit to construct, erect or install a spa pool and its safety barrier.
To find out if you are eligible for an exemption, please contact your local council.
It is against the law to not get a permit but that is only the start.
If you choose to not get a permit, then you most likely will run into trouble when you go to sell your property and this will incur far greater cost than doing it prior to installation.
WARNING: If there was an accident that involved your spa or swim spa, and you did not get a permit, it is likely that your insurance would not cover you and you could be open to civil and criminal action.
Please get a permit. It is worth it.
At the time of publication, South Australia does not have a formal swimming pool and spa registry at state level. Some local councils have a formal swimming pool register while others don’t. We recommend you contact your local council to confirm what the requirements are in your area.
Rules for council approval and building permits for constructing timber decks vary in South Australia, depending on your local council. A general rule to follow when adding decking is;
We recommend that you contact your local council to find out what the requirements are for building or renovating in your area.
Spa World can provide generic concrete slab designs for both swim spas and portable spas that are suitable for most soil types. Please email compliance@spaworld.com.au
Yes, according to legislation, a compliant barrier must be installed around private spas in order to restrict access to the pool by young children. A lockable hardcover is not considered to be a suitable barrier in South Australia.
You should contact a builder that’s registered in the right category or class to carry out this work. Although you can choose to be an owner-builder, you may need to apply for an owner-builders license. We recommend you contact your local council or certifier to determine the requirements in your area.
Yes. A boundary fence can act as part of a barrier to a pool if the height of the fence is at least 1800mm on the inside. A boundary fence also needs to have a non-climbable zone with a 900mm radius from the top of the inside of the barrier.
Yes, in case of an emergency, the law requires that you have a first aid (CPR) sign displayed near your spa. The sign must be in good condition, durable, weatherproof and minimum size of 300mm by 300mm.
Yes - All Spa World products have the relevant electrical approvals where required by legislation.
Do you require a copy of these certificates? Please email compliance@spaworld.com.au
Are you wondering what the spa regulations are in Australia? To learn what rules and common questions apply nationwide including -
To find the anwers to these questions and more, click the link below.
Yes, you can install a spa into a deck. It’s important to keep in mind that there are many things to consider in order to have trouble-free use of your spa for years to come.
For more information, head to the Spa World™ learning centre.
Spa pools are heavy and we do not recommend that you lift one manually. It is best to read our pre-delivery guide for professional advice and handy tips before making plans to move your spa.
Yes, you will need a crane to install a swim spa. There are several options to consider, depending on accessibility to your spa space. A Hiab truck may be able to do the job, otherwise it will be necessary to hire a crane.
The answer to this question will depend on access to your property and the desired location of the spa pool or swim spa. There are a number of points to consider before your spa delivery and when you purchase a spa from Spa World™ you will need to send through property access details.
Watch this short video to find out what information is needed before your spa is delivered.You can also visit our learning centre for more details.
Yes, you can install your spa in-ground or into a pit. However Spa World™ does not provide in-ground shells. For more information, we recommend you check out the Spa World™ pre-delivery guide.
We recommend that you use engineered concrete slabs for your spa foundation and can even provide you with a generic engineered design. However if you would like to place your spa on a different foundation, it should be certified by an engineer. To learn more, read A solid foundation for your spa - what you need to know.
Depending on your situation, you may need approval from your local council to install a spa pool or swim spa in your desired location. We recommend you make contact to find out what requirements apply to you.
Fencing requirement guidelines depend on many factors including product and location and this can vary between states. We advise customers to contact the local council or certifier before installing a spa.
The Spa World™ team does not install spa pools or swim spas or issue certifications for your installation. Spa World™ can refer you to a certifier (Surveyor) that can help you with regulations for your installation.
Spa World™ does offer delivery services, for a fee, to customers who live within a particular radius of a Spa World™ Showroom location. To find out if your spa can be delivered to your property, please contact your local Spa World™ showroom.
The Spa World™ pre-delivery guide will provide you with all the information you need before installing your spa. When you make your spa or swim spa purchase, you will be assigned a Spa World™ concierge who will look after you and make regular contact from the moment you make your purchase through until after delivery.
No, you do not need to contact a plumber. However, if you’re installing your spa pool or swim spa into a pit, you will need a plumber to ensure an adequate drainage system is in place in order to prevent the pit from flooding.
Floor levelling products are available to help you create a level surface. If you have a fall of more than 20mm over the length of the spa, you may be able to use wedges chocks to make the surface level. We suggest you email compliance@spaworld.com.au
Wondering what the most common spa foundations are and what measure you need to take before installing your spa? Read this article to learn more.
All electrical work must be completed by a qualified electrician.
We recommend the distance between the spa heat pump and spa circulation pump should be no greater than 3 metres. The height distance between the two pumps should not be any greater than 1 metre. To learn more, read this article: Installing an external heat pump for your spa.
To find out what power supply you need, refer to the tech sheet for your Spa World™ spa which can be located and downloaded from the product page on our website.
All spas need to have both certifications in order to be sold legally in Australia and New Zealand. It’s important that a spa meets all approvals for the safety of you, your family and friends. Email compliance@spaworld.com.au for more information.
No, a licensed electrician must install a dedicated power supply that meets local and national regulations.
Yes, when your spa or swim spa is not in use, it needs to be covered. The covers available at Spa World™ are lockable and provide a high level of insulation. Effective insulation will help reduce the running costs of a spa. Please note that leaving an empty spa uncovered and exposed to the sun will damage the acrylic shell and is not covered under warranty.
Spa World™ offers salt systems for swim spas but there are other solutions including peroxide-based systems on offer that may be better suited for you. For more information, read what to use instead of chlorine in a spa pool.
No, this is not a possibility because the spas are designed and engineered to function for optimum performance and meet the relevant regulations.
Yes, you can leave your spa without water in it. However, you must follow the shut down procedure in your manual and ensure the hardover is in the correct position. This is to reduce the effects of direct sunlight or too much heat on the spa shell. Leaving an empty spa uncovered and exposed to the sun will damage the acrylic. This is not covered under warranty.
You can operate your spa with cooler water in the summer. However, if the outside temperature is 40 degrees celsius, the temperature of the spa water will also be high due to ambient temperature. If you truly want a cool spa in summer, you may need to purchase an optional heat pump which can both heat and cool the spa water. Heat pumps can also save up to 70% on spa heating costs compared to electric heaters.
Yes, it is possible to install a spa pool inside a house if the desired destination point for the spa is accessible. We recommend that you ensure your ventilation and drainage system in your house functions properly. This is to minimise any damage if the spa was to ever develop a leak.
Yes, you can turn your spa off between uses however we don’t recommend that you do this. That’s because the spas are designed to filter and heat when not in use. When you turn the spa off, the filtration system cannot function and your water will need to be replaced or treated excessively in order to be safe.
We hope this article has helped answer your questions about the rules, regulations and what you can and can’t do with your new spa or swim spa.
If you need help or have further questions, please get in touch with our Certification Team. We can help with advice and put you touch with recommended certifiers in your area. Click the button below to contact us.
Planning to install a spa pool or swim spa in Australia and want to know what the rules and regulations are? Wondering if you need a building permit, approval, fences or fencing? Looking for a certifier or surveyor for compliance? This article has the answers.
Installing a Vortex Pergola™ in South Australia and want to know the rules and regulations including compliance, permits and approvals? Looking for information about foundations or want to hire a certifier? Read this article on full details.
Equipotential bonding is one of the most important steps when installing a spa and many outdoor leisure products. What is equipotential bonding and why does it matter? Read this article and watch the video to learn more.
Congratulations on the purchase of your new spa, swim spa or plunge pool! In this guide you'll find information for a smooth, stress-free delivery and installation process.
Trustpilot is the most trusted, independent, on-line review and ratings platform.
